What to Use if You Don’t Have a Wrench

We’ve all had moments when a chair leg is wobbly and loose or there’s a leak in a pipe, or furniture needs to be removed to prepare for a home moving.

We try using our fingers, but we result in sore fingers, as an old saying is: make use of the correct tool to do the task at hand. In these instances, the best tool is the spanner (or wrench to the American readers) But what should you do if you don’t have an appropriate spanner?

Do not worry, we’ve put together a list of commonly used household items that you can utilize instead of the spanner.

We will continue the series with a second essential tool that every handyman must carry in their tool kit:

1. What Can You Use if You Don’t Have a Drill
2. What to Use if You Don’t Have a Wrench
3. What to Use When You Don’t Have a Hammer

What are the uses of a wrench/spanner? to do?

Spanners are available in a variety of sizes and types for many different purposes and are an essential element of every toolbox. They are used for loosening or tightening bolts, nuts pipe fittings, pipes and pipes They prove useful multiple times over.

What to Use if You Don’t Have a Wrench

Duck tape

Duct tape can be helpful in any circumstance However, you may be surprised to find out that it is a great tool in order to allow bolts to be loosen. Start by tearing off a piece approximately 12 inches long Then, you can you can tear it in the middle leaving two strips of 12 inches.

Create a sturdy tape strip by gluing one end to its back (the not-slip side) then wrap the remaining portion from the strip over the nut, leaving the ‘tail’ about that is 6-8 inches long. Press hard to make sure it is stuck to the nuts. The duct tape tail should be pulled in the direction needed in order to release the nut so that you can be able to easily take it off.

Two coins

Who would ever think that money could be used to make a tool? Make two large coins (2 penny coins are ideal to do this) and put them one side of the nuts.

Hold the coins between your middle and index fingers to give you a better grip. move them in the direction required to loosen the nuts.

Zip-tie

These amazing little tools can be used for more than just tidying up cables or attach hubcaps. They can be used to replace the spanner.

Secure the zip-tie on the nut as tight as you can and then using the tail end of the zip-tie, pull it in the direction required for loosening or tightening the nuts.

Another bolt and nut

If you don’t own any of the above items, but you have plenty of bolts and nuts lying around You can still make an impromptu spanner by using two bolts and two nuts.

Then, connect an nut to one bolt and then place it on the top of the nut you want to adjust or remove (so that the bolt’s thread is over the nut). Make adjustments until you are secured securely between the bolt’s head with the nuts.

Take the second nut, and then attach it in a way that you connect the bolts. ensure that the bolts are tightly connected. Finally, make sure that you rotate the creation towards the direction that you need to turn it.

That’s four options you can employ for loosening or tightening nuts with out the use of a spanner. This guide will ensure that you’ll have no excuses anymore for why you’ve not completed one of the tasks you believed couldn’t be completed just because they don’t possess the right tools!

Of course, it’s always advisable that you have your own tool box that contains the essential tools needed to do the job, but with these simple solutions, you’ll never be trapped in a tight spot once more.