Water Pressure is Too High? Find Out What To Do!

Have you noticed that your shower’s water is sprinkling? Does your washing machine take forever to refill? All of these are signs of low pressure in your water and this problem is seen in a lot of households. However Have you ever considered what happens if you home’s pressure is too extreme ?

The high pressure water supply can shorten the lifespan of your appliances and causes damage to the plumbing of your fixtures, which can lead to pipe bursts and leaks. And, not only that, excess water waste is detrimental for the environment, and could cause more damage than you imagine.

You’re at the right spot, in the event:

  • There are banging sounds emanating from your pipes.
  • The appliances of your home leak once in a while;
  • Get advice from knowledgeable experts.

Let’s discover the reason why your pressure of water is excessive and at the same time, discover the best way to check it. If you’re lucky you could discover that the issue isn’t as daunting as it appears.

Symptoms of High Water Pressure in Your House

1. Banging Sounds in Pipes

You’ve heard that terrifying banging sound coming from the pipes. It’s referred to as”water hammer” or “water hammer”, and it occurs when a fast-moving water flows stop. A fixture, for instance the faucet or valve, could stop water from its tracks.

It is the result of a shock wave being sent through the water of the plumbing. In reality, the strong vibrations can cause the well-known shuddering sound that your pipes make.

2. Leaking Fixtures and Burst Hoses

The plumbing in your home cannot withstand pressure from water. If a powerful flow of water causes pressure on the fittings, it can cause burst the pipes or hoses. It could even cause pinhole leaks that occurs only after you realize that damage has been done to your ceiling or walls is done.

According to research, water pressure above 80 psi (pounds per square inch) causes the failure of water fixtures.

The most commonly observed indications are leaks or spitting faucets, particularly if it’s from the faucet that’s cold. A different sign to look for is when a tiny stream of water spraying appears on the ends or the bottom.

Contact a professional If your sink is leaky or if there is any apparent fault within your plumbing system.

3. Failing Appliances

You just purchased a brand new washing machine, but it broke down in its initial month. Did your dishwasher inundate the kitchen? Do not blame the manufacturer, as an appliance’s failure before it’s time is an indication of high pressure in the water.

The issue with a leaky water heater might result from excess water force, because the internal components of the appliance aren’t able to stand up to high pressure. Be cautious and make sure that the pressure isn’t over 80 PSI. Otherwise, you’ll end with a call to the nearest technician to request repair service.

Before you blame your plumbing company or water supply system, you must first determine the root of the issue.

Causes of High Water Pressure

Most water pressure changes are the providers’ responsibility. You may have high pressure water in high-rise buildings or when a number of hills surround your property. For those who live on the top floors the provider pumps more water.

Tips to use: Constrained by the area of your property, the normal water pressure ranges from 3 to 5,5 bar.

Fire water hydrants require a large amount of water in just a couple of minutes. In order to perform as intended they require a more powerful stream. If you are close to one, it could be the reason for the high pressure in your home.

If the water system has been through maintenance work there is a buildup of air trapped within the pipes. The pressure is temporarily increased. Try to use your faucets for a few minutes to determine if this can fix the problem.

The abnormal pressure can be the result of changing or re-routing of water distribution network. In the majority of cases the businesses are efficient and normal water distribution is restored quickly. In some instances it is due to the installation of your fixtures and equipment.

Once you’ve identified the root of the problem in your water pressure, it’s time to figure out how to respond.

How to Diagnose and Fix High Water Pressure in Your House

If you’re an amateur plumber We’ve put together the exact 3 steps you need to follow.

Step 1. Test With a Water Pressure Gauge

The gauge for water pressure is a measure of the force applied by the liquid while it’s in a state of equilibrium. It is simple to operate, and is comprised of an indicator dial, a the hose is braided and fitted.

A test using a pressure gauge is the best method to test the pressure of your water in your home. The tool is available at most hardware stores, or purchase it on the internet.

Do you want to take the test yourself? Follow this easy guide to get the basics in just five minutes.

A useful tip:Remember that the water pressure in your home shouldn’t be more than 80 psi. If you notice that your gauge of pressure shows over that.

Step 2. Use a Pressure Reduction Valve

The valve controls the flow of water through an inner diaphragm. Simply adjust the regulator to the desired setting.

The best solution to your pressure water issue could be fitting an automatic Pressure reduction valve. It requires plumbing expertise and expertise to set up the device. Get a plumbing Installation service for those who are an inexperienced.

However, you might think that you’re an expert in the field, and you are seeking an opportunity to do it yourself. You must be able to operate the tubing cutter because there’s a lot to do. Check out this tutorial on how to install the water pressure-reducing valve.

The regulator can last for more than seven years, and is advantageous for your water bill. According to the International plumbing code, it’s always recommended to get one installed. Additionally you can save at least sixty liters of water every hour. What’s not to love?

Tips to use: Do not turn down the mains stopcock since it can cause decreased flow and create a loud plumbing system.

Step 3. Contact Your Water Company

Contact your water provider if you find that the pressure of your water is far over the norms. If your pressure is higher than 100 psi or greater it could be a sign of that there is a problem with the water supply system.

It’s the responsibility of the service provider to ensure that your home is receiving the proper amounts of water. They will allow you to make a complaint if you’re not satisfied with their service.

A useful tip: Look up this map If you’re not sure of the water provider that supplies to your region, or how to get in touch with them.


  • Pay attention to your plumbing system for any shuddering or banging noises.
  • Always seek out a professional for help to find out the reason for the leak.
  • Examine your appliance to determine if it is not working as expected since this could be a sign of an issue with the pressure of water.
  • Use a pressure gauge to test the water pressure of your mains water.
  • To benefit you, install the pressure reducer (PRV) fitted.
  • If the pressure of your water in your household is excessively high, contact the water distributor you use.